Hitech vibratory finishing machine

1. Structure:

-

Vibraotry finishing machine-is composed of inertial vibrator, vessel, electrical cabinet and basement.

Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.

Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable-Polyurethane, to weaken the noise and the bump of workpieces on vessel.

Electrical cabinet:-Operate the machine by buttons on the control panel.

Basement: It is weld of steel

-

2. Function:

-

Vibratory finishing machines are suitable for deburring, descaling, edge radiusing, polishing, surface improvement, pre plating finishing all types of components including fully machined parts in metals

-& plastics

-

3. Working Principle

-

The Vibratory Finishing Machine for Metal Working has a ring chamber to hold abrasives and workpieces. When the machine is working, it makes three-D high frequency vibration. The grinding stones and the workpieces are rolling spirally forward and they are grinding each other during the rolling. This makes the workpieces de-burred, chamfered, polished and clean. To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.

-

-4. Models and Parameters

-

-

-

---

-